9CR.NET Özgür Forum Sayfası  
-
Go Back   9CR.NET Özgür Forum Sayfası > Güvenlik - Bilgisayar - Cep Telefonu > Bilgisayar Programları

   REKLAM    REKLAM
Yeni Konu aç Cevapla
 
LinkBack Seçenekler Stil
Alt 09-24-2018, 07:58   #1
Avatar Yok
Üyelik tarihi: Feb 2018
Mesajlar: 28.640
Konular: 28640
Tecrübe Puanı: 29
Rep Puanı : 10
Standart Autodesk PowerMill 2019.1 Update


Autodesk PowerMill 2019.1 Update | 98.1 mb

Autodesk announced the new release PowerMill 2019.1, is the world's leading specialist NC CAM software for manufacturing complex shapes typically found in the toolmaking, automotive, and aerospace industries. This update introduces certain features, new fixes or addresses issues relating to the release.

Release Notes - PowerMill 2019.1 Update:
Summary for 2019.1


What's New

Setups

Setups are entities that contain an ordered list of toolpaths, and define a number of properties for a machining operation. We have made improvements to the functionality and usability of setups in PowerMill 2019.1:
- Workplane: Specify a workplane for a setup as the common workplane for the stock, and newly created toolpaths in the setup.
- Stock: Define the stock for a setup to specify its geometry for each machining operation. Stock represents the size, shape, and orientation of the raw material, from which parts are machined.
- Clamps: Associate clamps with setups to automatically identify the model-surfaces to avoid, or ignore, when a toolpath in a setup is calculated. Clamps represent the physical apparatus used to secure the stock during a machining operation.
- Ribbon interface: Use the new Setup tab on the ribbon to help you manage, edit, and work with setups in your projects.
Probing
- Surface inspection: Create probe tools and surface inspection probe-paths to inspect parts while they are still on the machine tool.
- Inspection results: Upload the machine-generated results files to Autodesk® Drive to examine any deviations between your manufactured parts and the nominal CAD data. Alternatively, import your results into Autodesk® PowerInspect for further analysis.
Collision Checking
- Colliding toolpath sections: Keep colliding sections of toolpaths, instead of automatically deleting them, when checking for collisions between the part and the shank or holder. Colliding sections are displayed in the graphics window, and are automatically updated when you edit the tool or toolpath. This helps you identify where edits need to be made, and lets you check if your changes have corrected the colliding sections.
- Collision avoidance: Automatic tool-axis tilting is improved for transitions that use the C-axis of a machine tool. The movement from one tilt direction to another is stabilized by smoothing out the transition over a larger distance. This helps reduce sudden accelerations of the machine tool.
Turning
- Pattern Turning strategy: Create turning toolpaths that directly follow the curve geometry within a pattern. This advanced-user strategy lets you create turning toolpaths from custom curve geometry. Create modified variants of existing toolpaths by: inserting the toolpath into a pattern, editing the curve geometry, calculating a pattern turning toolpath.
Posts in the Cloud
- Improved delivery of post-processor option files: If Autodesk provides you with new or updated option files for your post-processor, the files are now stored in the cloud. This means you can access the most up-to-date files directly through PowerMill as soon as they become available.
Usability Improvements
- Vortex area clearance: The maximum stepover for vortex toolpaths is increased to 99% of the tool diameter, extending the usability of vortex to indexable tools.
- Plane-locking: Enable plane-locking to automatically position points, entered using the mouse, to lie along the principle plane of the active workplane.
- Ignore workplanes: Import CAD models without their associated workplanes. This is useful for models that contain many redundant workplanes that have no effect on the machining process.
- Merging projects: When you import one project into another, the option to treat new models as reference models now applies to the toolpaths and boundaries in both projects.
- Drilling feed rate: The Feed rate reduction page is updated to improve usability, with the options to reduce the feed rate at the intersections of holes moved onto a separate page.
- Upload to Fusion Production: Assign tasks to workcells or workstations. Previously, only workstations were available. In addition, the user interface is improved with controls to select multiple tasks.
- Stock model support for additive toolpaths: When applying an additive toolpath to a stock model, the stock is now updated to show deposited material. Previously, PowerMill treated additive toolpaths as subtractive toolpaths, resulting in material being removed from the stock model instead.
- Visualizing deposited material: When creating additive toolpaths, the type of tool that is automatically created is now tipped disc instead of ball nosed. This provides a better representation of deposited material when you animate additive toolpaths and apply additive toolpaths to stock models.
Speed Improvements
- Project loading: Loading projects that contain many toolpaths and model surfaces is now significantly faster.
NC Program Verification in PowerMill Standard
- Limited NC Program verification is now available in PowerMill Standard. It will verify all toolpaths and connections between toolpaths for tool gouges and tool collisions with the model. Advanced verification of the machine tool remains a PowerMill Premium feature.
Collision Avoidance and Collision Checking Fixes
- After collision checking, a toolpath that used a negative thickness was not split into safe and unsafe parts correctly. This is fixed.
- Automatic collision checking on a curve profile toolpath failed to remove colliding moves. This is fixed.
- The clearances used by NC program verification were not initialised to the values used in toolpath verification, which could make the toolpath appear unsafe. This is fixed.
- Automatic collision checking failed to detect colliding spans within a corner finishing toolpath. This is fixed.
Finishing Toolpaths Fixes
- Steep and shallow regions were not identified correctly when machine maximum stock was set. This is fixed.
- Steep passes failed to descend to the correct depth in a steep and shallow toolpath. This is fixed.
- Gouges were made by a steep and shallow toolpath because the shallow region was not defined correctly. This is fixed.
- Reduce the excessive time taken to calculate 3d offset toolpaths on large parts inside complex boundaries. This is fixed.
- A surface finishing toolpath included a gouging move. This is fixed.
- An optimised contant z toolpath was not ordered correctly. This is fixed.
Area Clearance Fixes
- Significant speed up in Area Clearance on parts with very large number of pockets.
- Fixed a gouge in Area Clearance when the input boundary has overlapping regions.
- Fixed a bug that would cause incomplete machining of flat surfaces in Area Clearance.
- Fixed an ordering bug in Area Clearance that could have caused the tool to crash into unmachined stock.
- Fixed a failure to recalculate a Vortex toolpath after a parameter change.
- Fixed a bug that prevented Vortex From Stock toolpath to calculate with pre-drilling positions.
- Some speed improvements in Vortex From Stock calculation.
- Improvements to the coverage of Vortex From Stock toolpaths.
Drilling and Threading Fixes
- Fixed a crash that sometimes occurred when deleting a drilling method.
- Fixed the use of tolerance in spiral profile in drilling toolpaths.
- Fix to allow rigid tapping to bottom of hole with multiple pecks.
- Fix threading when a component range is used.
- Allowed the drilling peck retraction factor to exceed 1.
Turning Fixes
- Fixed a bug that could cause some turning toolpaths to gouge the part.
Face Milling Fixes
- Fixed crash with Face Milling with a fixed angle of -90 degrees.
Toolpath Editing Fixes
- The tool axis tilted unnecessarily along skim links. This is fixed.
- In area clearance toolpaths, an incremental plunge move preceded the ramp lead in entering a pocket only when the previous cutting move was lower than the subsequent one. This is fixed.
- Toolpath statistics were not updated after loading data from the tool changed feedrates. This is fixed.
- Replaying the edit history on a toolpath to which automatic reordering had been applied resulted in a crash. This is fixed.
- Attempting to use Dynamic Machine Control to edit selected regions of a toolpath that had used automatic collision avoidance would result in a crash. This is fixed.
Stock Model Fixes
- Fixed a bug that caused the same entities to be shown referencing the Stock Model at each state.
Option files for Simulation and NC Program Verification Fixes
- An issues with the speed of simulation and verification with an option file that matches the machine tool has been fixed.
- The machine tool no longer fails to find legitimate solutions when PowerMill is working in inches and an option file with linear limits is in use.
- Associating an option file with a machine when an axis has a limit set to 0 now works correctly.
- Retract and reconfigures are reported when an option file that uses linearisation is in use.
- There is a single report for each retract and reconfigure when an option file that does not use linearisation is in use.
NC Programs Fixes
- The NC Program icon now includes a hand if the NC Program is manually ordered.
- The NC Program written status is updated when a contained toolpath is deleted.
- Adding a Setup to an NC Program that already contains several Setups is now much faster.
- Deleting a Setup that is in an NC Program is now much faster.
- Toolpaths added to a folder in a Setup are now inserted in the correct place in any manually ordered NC Programs containing the Setup.
- Fixture offsets can be added on the NC Preferences page again.
Setup Sheets Fixes
- A crash when outputting a Setup Sheet that used the {ncprogram.OptionFile} parameter when the NC Program does not have an option file set has been fixed.
- A crash when outputting a Setup Sheet that used the {setupsheets.model.file_name} parameter while a plane from the block had been added to the model has been fixed.
User Interface Fixes
- When exiting a PowerMill mode (curve editor etc), normally the ribbon reverts to whichever tab it was on before entering the mode; however, if the mode was entered from a user-defined custom tab, it always reverted to the home tab. This has now been fixed to revert to the custom tab.
- PowerMill's user interface is now more responsive when handling very large models - the lag following a parameter change has been significantly reduced.
- A crash that occurred when closing toolbars following text entry (e.g. the spline fit toolbar within the curve editor) has been resolved.
- User defined settings were not appearing on the "File -> Info" page until another was added - this now works correctly.
- Some forms (including tool and strategy) didn't move when they were on a secondary monitor that was disconnected, meaning that it wasn't possible to use them. This issue has now been fixed.
- The "factory default" colours assigned to different thickness sets have been modified to provide better contrast between thickness rows. Existing users of PowerMill would need to "Restore Defaults" on the colour manager to obtain the new colours.
Feature Groups Fixes
- In some cases rectangular pockets were being incorrectly rotated following recognition - PowerMill will now correctly align them to the model geometry.
Workplanes Fixes
- In the Workplane Editor, after pressing the button to set the Z-direction, the Y-direction vector was being displayed on the form, despite the graphics being correct. The issue has been fixed.
Tools Fixes
- An issue with the tool database has been resolved where a holder would not attach to a tool/shank when the Connection filter was applied.
- Tool opacity may now be controlled as a global setting via a slider on the Tool->Draw ribbon panel, or on the Right Mouse Button menu.
Setups Fixes
- The copy behaviour on toolpaths has been made more consistent, so a toolpath that's part of a setup will remain in the setup when copied, and a toolpath not in a setup will not be placed into one when copied.
- When a setup is part of an NC program that is manually ordered, adding a toolpath to the setup now results in the toolpath being added to the NC program in a more logical position.
Shared Views Fixes
- PowerMill now allows stock models to be correctly shaded when exporting them to shared views.
- The browser shared views page now displays the correct language - PowerMill previously passed an incorrectly formatted locale string.
Additive Plugin Fixes
- The calculation of a feature construction toolpath from the medial axis failed when the feature included surfaces that overlaid the base surface. This is fixed.
- Start/and end points on a feature construction offset toolpath were not rotated. This is fixed.
- Strings within the Additive plugin were not localised. This is fixed.
- Reading in template projects became excessively slow when the Additive plugin was enabled. This is fixed.
- The deposition within the upper layers of a feature construction toolpath were incomplete for a shallow feature. This is fixed.
Robot Plugin Fixes
- The Robot Plugin will not re-setup collision detection multiple times when loading a robot.
CER Report Fixes
- The calculation of a toolpath from an embedded pattern no longer results in a crash.
- When attempting to convert a toolpath to additive without having specified a level or set for the base no longer results in a crash.
- Fixed crash that occurred when recalculating a Rest Area Clearance toolpath after changing the "Detect material thicker than" threshold.
- Fixed crash when interrupting an Area Clearance calculation, using automatic stock collision checking.
General Fixes
- Restored the white background in the snapshot mode.
- Calculate correct cylinder block around a selection of several models.
- Improvements to the creation of features from surfaces.
- A speedup has been made to reading in projects, where the user interface was being updated unnecessarily.
- The model wireframe style options (e.g. dashed) now work again as they used to in a previous version.
- A crash that occurred when attempting to run a macro whilst it was already running (e.g. by clicking the macro in the Explorer) has been fixed.
- More significant speedups were made to project reading, to reduce inefficiencies fixing up thickness sets.
- A crash and data loss relating to storing "live text" meta-data within patterns has been resolved.
- When importing an archive project via the "File -> Import" page, PowerMill was incorrectly closing the current project and opening the archived one - this has now been fixed so that it imports and merges the project, as expected.
- Projects containing very large models were taking a very long time to close - the time taken to close has been dramatically reduced.
- A crash that occurs when accessing the strategy rest page following an imported 2018 template has been resolved.
- When items are renamed in the Explorer, they are now less likely to "collapse".

About Autodesk PowerMill 2019. Autodesk's PowerMill 2019 CAM software includes developments designed to enhance existing functionality for high-efficiency machining.

This version includes additive manufacturing (AM) strategies and simulation tools designed for hybrid machines. It generates safe and efficient tool paths to drive directed energy deposition (DED) processes that use wire-fed or powder-blown hardware. Specialized three- and five-axis programs enable building entire components from scratch. It can also apply localized features or surface coatings to repair or enhance existing parts.

For five-axis programming, the software includes improved collision avoidance tools. An automatic tool-axis tilting method simplifies programming, helping to generate smooth and safe five-axis motion for all model shapes and toolpath types.

Vortex, the high-efficiency roughing strategy, now includes a "from stock" option based on the company's adaptive clearing technology. It creates tool paths with offsets based on both the shape of the part being produced and the stock being milled, resulting in efficient tool paths with shorter machining cycle times and fewer tool retractions.

For 2D machining, the software improves workflow for defining open-sided pockets and bosses. The existing 2D tool paths recognize these features, automatically positioning tool entry and exit points to avoid overloading cutting tools. It also enables users to create 2D features based on a selection of surface.

ViewMill, a stock simulation tool, now includes a "remaining material" shading mode. This helps programmers to identify areas of unmachined stock to ensure parts are fully machined before removal. The shading mode automatically identifies the maximum amount of stock left on a simulated part and provides dynamic slider bars to visualize the distribution of stock.

The software also includes a "setups" feature that enables programmers to better manage the synchronization between tool paths and NC programs. It also provides functionalities for parts with multiple fixture offsets.

About Autodesk. Autodesk helps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.

Product: Autodesk PowerMill
Version: 2019.1 (Build: 2019104) Ultimate Update
Supported Architectures: x64
Website Home Page :
Kod:
www.autodesk.com
Language: multilanguage
System Requirements: PC
Supported Operating Systems: Windows 7even or newer
Software Prerequisites: Autodesk PowerMill 2019 or above
Size: 98.1 mb
DOWNLOAD

Kod:
http://nitroflare.com/view/9F258F530C02DF9/z9s3y..rar
Kod:
http://rapidgator.net/file/f8d3d83804cacc6a634f3e756b59682b/z9s3y..rar.html
Kod:
http://turbobit.net/qxdne0jskbmk/z9s3y..rar.html

Paylaş |
Bo0mB0om isimli Üye şuanda  online konumundadır   Alıntı ile Cevapla
Yeni Konu aç Cevapla

Etiketler
autodesk

Seçenekler
Stil

Yetkileriniz
Konu Acma Yetkiniz Yok
Cevap Yazma Yetkiniz Yok
Eklenti Yükleme Yetkiniz Yok
Mesajınızı Değiştirme Yetkiniz Yok

BB code is Açık
Smileler Açık
[IMG] Kodları Açık
HTML-Kodu Kapalı
Trackbacks are Açık
Pingbacks are Açık
Refbacks are Kapalı


Tüm Zamanlar GMT +3 Olarak Ayarlanmış. Şuanki Zaman: 16:50.
Forum yazılımı ve sürümü Site Bilgileri
Powered by vBulletin® Version Gizlenmiştir
Copyright ©2005 - 2014 Hakları Saklıdır.
Bu Site VbuLLetin Tabanlı Forum Sitesidir.
İçerik ve Dizayn 9CR.NET Aittir.
 
9CR.NET Forum Sitesi Her Hakkını Saklı Tutup, Üyelerin Mesajlarından Sorumlu Olmamaktadır. Sorularınız ve İstekleriniz İçin Forum Yöneticilerine Ulaşıp Mesaj Bırakabilirsiniz. Her Üye Kendi Mesajlarından Sorumlu Tutulup, Gerektiğinde Yetkili Mercihlere Bilgi Paylaşımı Yapılacaktır.
Destekleyenler - Desteklenenler
Forum Sohbet Odaları | Sohbet

Content Relevant URLs by vBSEO 3.6.0 RC 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254